The edge inspection vibrating knife integrated machine is a device used for cutting various materials, and its operation process is as follows:

1. Preparation: Firstly, the equipment needs to be installed on a flat and stable surface, and ensure that the power, water, and gas sources are all connected.

2. Loading materials: Place the materials to be cut on the workbench of the equipment and ensure their flatness and stability.

3. Parameter setting: Set the cutting speed, pressure, vibration frequency, and other parameters of the equipment according to the properties and requirements of the cutting material.

4. Start the device: Press the start button on the device to start working.

5. Monitoring the cutting process: During the operation of the equipment, it is necessary to closely monitor the cutting effect, adjust the equipment parameters in a timely manner, and ensure the cutting quality.

6. Complete cutting: After cutting is completed, the equipment power needs to be turned off, the cut material should be taken out, the workbench should be cleaned, and the next cutting should be prepared.

It should be noted that when operating the edge inspection vibrating knife integrated machine, it is necessary to strictly follow the operating procedures and safety regulations of the equipment to ensure the personal safety of the operators and the normal operation of the equipment.