The fixing method of automotive mold machines varies depending on the equipment model, usage environment, and specific operation. Generally speaking, it can be done in the following ways:
1. Basic support: To ensure the stability of the equipment, it is necessary to install some anchor bolts or pads on the ground foundation to keep the machine vertical and horizontal.
2. Workbench positioning: The position of the workbench can be determined as needed and adjusted by hand to achieve the best condition. If necessary, a pressure plate can be placed between the guide rails for adjustment and the screws can be locked. Some precision CNC machine tools use automatic tool alignment devices to ensure accuracy when clamping workpieces. For large tonnage automotive mold machines, a combination of sleepers and steel frames can be used to ensure load-bearing capacity. Automatic control of position accuracy and safety interlock circuits to prevent misoperation can also be achieved by setting safety limit blocks and photoelectric switches. In addition, it is necessary to avoid strong impact or violent vibration, otherwise it will affect precision and lifespan. After completing these steps, the parts can be firmly and stably placed on the mold smoothly. The above content is for reference only, and it is recommended that consultants obtain the information.